A slide accessibility checklist is the fastest way to find out whether your deck works for everyone in the room, including people who use screen readers, have low vision, or are colorblind. Most inaccessible decks fail in the same three places: low contrast, images with no alt text, and objects that a screen reader reads in the wrong order.
None of these fixes take long once you know where to look. This checklist covers the three big ones in detail, then the smaller items that catch most of the remaining problems, and ends with how to export a PDF that keeps your work intact.
Why a slide accessibility checklist matters
A slide that looks fine on your laptop can be unreadable or nonsensical to someone else. Microsoft's guidance notes that a screen reader reads the elements of a slide in the order they were added to the slide, which can be very different from the order in which things appear. A chart you placed last may be announced first.
Accessibility also helps people you did not plan for: someone reading your deck on a phone in sunlight, a colleague who prints in grayscale, or a client who skims the file with a screen reader before the meeting. The checks below are cheap, and they make slides clearer for everybody.
Step 1: Fix color contrast
Contrast is the difference in brightness between text and its background. The W3C's WCAG 2.2 success criterion 1.4.3 requires at least 4.5:1 for normal text and 3:1 for large text. Large text means 18 point or bigger, or 14 point bold or bigger.
Treat those numbers as pass or fail. WCAG says the thresholds should not be rounded, so a ratio of 4.499:1 does not meet the 4.5:1 requirement.
Contrast quick reference
| Text type | Minimum contrast ratio |
|---|---|
| Body text under 18 pt (or under 14 pt bold) | 4.5:1 |
| Large text: 18 pt or bigger, or 14 pt bold or bigger | 3:1 |
| Logos and brand names | No requirement |
| Purely decorative text | No requirement |
Source: W3C WCAG 2.2, Understanding SC 1.4.3.
Where decks usually fail
- Light gray text on white, often used for captions, footnotes and chart labels.
- Text placed over a photo, where part of the letters sit on a bright area.
- Brand accent colors, such as a pale yellow or light teal, used for body text instead of only for shapes.
If text sits on a photo, the W3C's technique G18 suggests darkening the background behind the letters or adding a thin outline so the contrast holds across the whole letter. A simpler habit is to put a solid, darker panel behind the text.
PowerPoint's Accessibility Checker flags insufficient contrast in text on solid opaque colors, but it cannot judge text over photos or gradients, so check those by eye or with a contrast tool. The Social Security Administration's PowerPoint checklist, for example, uses the Colour Contrast Analyser, where you sample the text color and the background color and read the ratio.
Step 2: Add alt text that does its job
Alt text is a short description that a screen reader reads aloud in place of a visual. Microsoft says you don't need alt text on text boxes and shapes that contain text, but every other object needs it, including pictures, charts, SmartArt and groups.
How to write it
Microsoft advises describing the image, its intent, and what matters about it, in a short sentence or two. It also says not to repeat the surrounding text, and not to start with phrases like "a graphic of" or "an image of."
| Visual | Weak alt text | Better alt text |
|---|---|---|
| Revenue chart | Chart | Revenue grew from Q1 to Q3, with the steepest rise in Q3 |
| Team photo | Image of people | The five-person support team at the Toronto office |
| Decorative divider | Blue line | Mark as decorative (no text) |
The rule of thumb: say what the viewer should take away, not what the object looks like. For a chart, put the conclusion in the alt text and keep the exact numbers in a visible label or table.
Mark decoration as decorative
Objects that add no information, such as background swirls or divider lines, should be marked decorative so a screen reader skips them. In the Reading Order pane, Microsoft notes that objects without a number are skipped because they are marked decorative.
Step 3: Check the reading order
Open the Reading Order pane from Review, then Check Accessibility. Objects are listed in the order a screen reader will read them, and the number beside each object shows its place in the sequence.
The Social Security Administration's checklist describes the test plainly: select each object in turn and confirm it matches the intended reading order of the slide. To fix it, select an item in the pane and use the Move Up and Move Down buttons.
A sensible default order for most slides:
- Slide title
- The main message or lead sentence
- The main visual (chart, diagram or image) with its alt text
- Supporting bullets or annotations
- Source line and footnotes
Step 4: Run through the smaller checks
Once the big three are done, these items from Microsoft's accessibility guidance catch most of what is left.
- Unique slide titles. People who rely on screen readers skim a list of titles to jump to a slide.
- Color is not the only signal. Microsoft suggests turning on a grayscale color filter and scanning each slide for color-coding that stops making sense.
- Meaningful link text. Use "Q3 pricing sheet" rather than "click here."
- Simple tables. Avoid split cells, merged cells and nested tables, and specify header rows.
- Readable type. Microsoft recommends 18 pt or larger, sans serif fonts, and enough white space.
- Captions for video. Add captions or subtitles to any embedded video.
Step 5: Export an accessible PDF
If you share a PDF, accessibility tags have to be added when you export. Microsoft says that after you fix the checker's issues, it uses that information to create the tags in the PDF.
- Run the Accessibility Checker and fix the issues it reports.
- Choose File, then Save As or Save a Copy, and pick PDF.
- Open More options, then Options.
- Make sure "Document structure tags for accessibility" is ticked, then save.
Microsoft's PDF documentation also says decorative content is left untagged and that bookmarks are created for each section and slide, which helps readers navigate.
Make accessibility part of how you build the deck
It is easier to build these habits into the start of a deck than to patch a finished one. If you generate a first draft with an AI tool such as SlideForge, which exports editable PowerPoint files, treat the draft as a starting point: open the file, then apply this checklist for contrast, alt text and order before you send it. Generated slides still need a human pass, because no tool knows which chart conclusion your audience needs to hear.
FAQ
Does PowerPoint's Accessibility Checker catch everything?
No. It finds missing alt text, missing titles and some contrast and reading-order problems, but it cannot judge whether your alt text is useful or whether text over a photo is readable. Treat it as a final safety net, and still review each slide yourself.
What contrast ratio do slides need?
WCAG 2.2 level AA asks for 4.5:1 for normal text and 3:1 for large text, meaning 18 pt or larger, or 14 pt bold or larger.
Do text boxes need alt text?
Not usually. Microsoft says text boxes and shapes that contain text don't need it, but pictures, charts, SmartArt, groups and other objects do.
How do I make a PDF of my slides accessible?
Fix the issues the Accessibility Checker finds, then save as PDF with the option "Document structure tags for accessibility" enabled, as Microsoft describes.
Accessible slides are not a separate design style. They are clear slides with a sound structure, and the five checks above take about ten minutes per deck once they are routine.



